- Diffuser 101 -
Using your diffuser in 6 easy steps.
Remove cover (both outer and inner if your diffuser has both).
Add room-temperature water until the level reaches but does not exceed the water fill line. (Always unplug the diffuser when filling or emptying the water reservoir.)
Add 6-8 drops of Young Living essential oil depending on the room size you're diffusing in.
Place lid (both lids if applicable) back onto the unit; align groove on the inner cover to the half circle on the side of the reservoir (may vary depending on model).
Plug in and turn on!
**Press the Power button to turn the diffuser on (One push = High mode, 2 pushes = Low mode, 3 pushes = Intermittent mode).
Press the Light button to cycle through the light modes and colors.
Did you know that Young Living diffusers are made with a quality plastic that won't break down over time due to contact with essential oils! They also have a one year warranty!!
Always turn off and unplug the diffuser prior to cleaning.
To ensure proper performance, clean the ultrasonic plate and lid after each use.
If essential oil begins to build up on the ultrasonic plate, gently wipe it off using a cotton swab dipped in rubbing alcohol.
If essential oil begins to build up on the lid, gently wipe it off using mild soap and water only.
Never use a corrosive detergent to clean the ultrasonic plate or damage will occur.
Periodically check under the diffuser to keep the fan intake free of debris.
Debris can be removed by blowing on the fan intake opening or wiping with a clean, dry cloth. (Do not use aerosol sprays, solvents, or abrasives to clean the plastic housing.)
When not in use, clean the diffuser and store dry. Replacement ultrasonic plates can be purchased from Young Living.